ABB AC 800M and S800 IO power supply SD853 3BSE088188R1 - Белая Дача

ABB AC 800M and S800 IO power supply SD853 3BSE088188R1

The SD85x Power supply units are designed for high efficiency, electronic inrush current limitation, wide operating temperature range, and extraordinarily small size. The lowest power losses and high lifetime expectancy deliver the lowest cost of ownership.

The SD85x series complies for use in potentially explosive atmospheres (IECEx Zone 2, ATEX Zone 2, and Class I Div 2). The SD85x series has a built-in power reserve and can easy breaking fuses due to high overload peak current capability.

Please contact me get more information

Email: Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com

General info
Article number3BSE088188R1
TypePower supply
Rated output current10 A
Rated output power240 W
Rated output voltage24 V d.c.
Mains/input voltage, nominal100-240 V a.c. 110-150 V d.c.
ApplicationsSELV and PELV
Efficiency93.6/95.2 % @ 120/230 V a.c.

Detailed data
Mains frequency50 — 60 HZ 6%
Load sharingParallel connection
Supervision relayYes
Power Factor (at rated output power)0.99/0.97
Heat dissipation16.4 W / 12.1 W, 120/230 V a.c.
Output voltage regulation at max. currentmax 50 mV 0 — 12 A
Maximum ambient temperature70 °C
Primary: Recommended external fuse10-20 A
Secondary: Short circuitHiccup (2s on 18s off)
Output over voltage protectionMax 32 V DC
AC input current2.15 / 1.13 A
AC inrush current6 A / 9 A peak

Please contact me get more information

Email: Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com

Environment and certification
CE markYes
Electrical safetyIEC 60950-1
ATEX Zone 2Yes
IECEx Zone 2Yes
Hazardous Location, Class 1 Div 2Yes
Hazardous LocationATEX Zone 2: EN 60079-0, EN60079-15; IECEx Zone 2: IEC 60079-0, IEC 60079-15; CSA Class I Div 2, Groups A, B, C D T4: ANSI/ISA 12.12.01-2015, C22.2 No. 213-M1987
Marine certificationDNV-GL, ABS
Protection ratingIP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04G3
Pollution degreeDegree 2, IEC 62477-1
Mechanical operating conditionsIEC 61131-2
EMCEN 61000-6-4 and EN 61000-6-2
Overvoltage CategoriesCategory III (IEC 62477-1 for altitudes up to 2000 m)
Equipment classI PE (Protection Earth) connection required
Max ambient temperature-25 °C (-13 °F) to +70 °C (158 °F), derating 6W / °C between 60 °C — 70 °C
RoHS complianceDIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE complianceDIRECTIVE/2012/19/EU

Dimensions
Width39 mm (1.53")
Depth117 mm (4.60")
Height124 mm (4.88")
Weight (lbs.)600 g (1.32 lbs.)
Mounting spacing W mm15 mm (0.59")
Mounting spacing H mm40 mm (1.57")

Features and benefits
DIN-rail mounting, Width 39 mm
Efficiency up to 95.2 %
20% Output Power Reserves
Easy Fuse Breaking due to High Overload Peak Current
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Temperature range -25°C and +70°C (derating 6W / °C between 60°C — 70°C)
DC-OK Relay Contact
Class I Div 2, IECEx Zone 2 and ATEX Zone 2

Please contact me get more information

Email: Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com

ABB AC 800M and S800 IO voter SS822ZSS822Z 3BSC610055R1
ABB AC 800M and S800 IO power supply SD854SD854 3BSE088189R1
ABB AC 800M and S800 IO power supply SD853SD853 3BSE088188R1
ABB AC 800M and S800 IO power supply SD834SD834 3BSC610067R1
ABB AC 800M and S800 IO power supply SD833SD833 3BSC610066R1
ABB AC 800M and S800 IO power supply SD832SD832 3BSC610065R1
ABB AC 800M and S800 IO power supply SD831SD831 3BSC610064R1
ABB AC 800M and S800 IO power supply SD822ZSD822Z 3BSC610054R1
ABB AC 800M and S800 IO rechargeable battery unit SB822SB822 3BSE018172R1